Large meter display (with backlight) of sound loudness, allowing the user to pinpoint the exact leak location.

Light weight amplifier, weighing only 31 ounces, with a padded carrying case and a strap.

Six selectable filters, split into three “low side” filters (100Hz, 200Hz, or 400Hz) and three “high side” filters (600Hz, 800Hz, or 1200Hz).

“Limitter” switch which cuts off all loud noises greater than 110dB. If you drop the sensor, you won´t hurt your hearing.

“Filter-Thru” switch, which turns OFF all of the amp’s filters, allowing the user to hear all sounds from 50Hz to 15,000Hz.

High-sensitivity ground microphone and low “electronic noise” amplifier combine to offer the very best quality sound for leak detection.

• Ground plate for pinpointing on streets/slabs
• Magnet base for surveying at hydrants/valves
• Contact rod for surveying at meters/fittings
  

LD-12 Operating Instructions

How to Pinpoint for Leaks
with the LD-12

Comparison of the LD-15 Leak Survey Instrument With the LD-12 Water Leak Detector

List of LD-12 Users

5 Year Warrranty

AMPLIFIER

Input Impedance: 50k ohms

Output Impedance: 15 ohms

Amplification: 62 dB +/- 3dB

Frequency Range:
1) 100Hz to 1200Hz (13 dB)
with Filter-Thru OFF
2) 15Hz to 30,000Hz (13 dB)
with Filter-Thru ON

Power: 6 AA dry cell batteries

Power Consumption:
1) 70 mA or less with backlight ON
2) 35 mA or less with backlight OFF

Battery Life:
1) 14 hours with backlight ON
2) 28 hours with backlight OFF

Weight: 31 ounces (885 g)

Size: 6.7" x 2.8" x 4.1"
(170mm x 70mm x 103mm)

ABS CARRYING CASE

Weight (full): 15 lb. (6.81 Kg)

Size: 18.5" x 14.6" x 7.5"
(470mm x 371mm x 190mm)

Download
PDF of
LD-12
Full Manual
(2.6MB)