![](images/1_No.gif) |
The LD-15 Professional’s Leak Survey Instrument is primarily
designed for water leak “surveys,” the term used
for listening for water leaks at hydrants, meters, and valves: |
![](images/spacer.gif) |
![](images/LD15_action6_QRG.jpg) |
![](images/spacer.gif) |
![](images/LD15_action9_QRG.jpg) |
![](images/spacer.gif) |
![](images/spacer.gif) |
Surveying
at a meter with the optional contact rod |
Surveying
at a hydrant with the sensor and magnet |
|
![](images/spacer.gif) |
![](images/ld15_QRG_std_access.gif) |
![](images/spacer.gif) |
![](images/1_circled.gif) |
Amplifier
with Meter Display and Filter Controls |
![](images/spacer.gif) |
![](images/2_circled.gif) |
Padded
Case and Standard Belt (40 inches) |
![](images/spacer.gif) |
![](images/3_circled.gif) |
High
Sensitivity Sensor and Cable |
![](images/spacer.gif) |
![](images/4_circled.gif) |
Base
Plate for Listening on Street Surfaces |
![](images/spacer.gif) |
![](images/5_circled.gif) |
Aviation-Grade
Stereo Headphones |
![](images/spacer.gif) |
![](images/6_circled.gif) |
Heavy-Duty
ABS Plastic Carrying Case |
![](images/spacer.gif) |
![](images/ld15_QRG_op_access.gif) |
![](images/spacer.gif) |
![](images/7_circled.gif) |
40
inches Long Contact Rod (not shown) |
![](images/spacer.gif) |
![](images/8_circled.gif) |
60
inches Long Contact Rod (not shown) |
![](images/spacer.gif) |
![](images/9_circled.gif) |
Large
Size Belt (50 inches) |
![](images/spacer.gif) |
![](images/10_circled.gif) |
Extra
Large Size Belt (60 inches) |
![](images/spacer.gif) |
|
![](images/4_No.gif) |
The Amplifier
has a large Meter Display, Volume Control, Mute Switch (also
serves as ON/OFF), and Filter Range Switch:
![](images/LD-15_QRG_Switches.jpg)
Use
the Meter Display to compare the loudness of leaks at
different locations. |
![](images/5_No.gif) |
The
LD-15 requires 4 “C” size batteries:
![](images/LD-15_QRG_Batt.jpg)
With
alkaline batteries, normal life is 80 hours.
|
![](images/6_No.gif) |
Turn
down the Volume Control before pressing the
Mute Switch. With the Mute Switch depressed, adjust the Volume
Control to hear the sounds comfortably.
![](images/LD-15_QRG_FilterSwitch.jpg)
There
are two Filter Ranges:
High:
30 Hz to 5000 Hz
Low: 30 Hz to 800 Hz
Use the High Range for water leak surveying and the Low Range for water leak
pinpointing.
|
HOME | WATER
LEAK DETECTORS | CORRELATORS | LEAK
NOISE LOGGERS | TRAINING | FINDING
LEAKS | WHAT
OUR CUSTOMERS SAY | CONTACT US
© 2016
SubSurface Leak Detection
|